Research progress in additively manufactured of selective laser melting 316 stainless steel

ZHANG Haibo; LIU Yanhui; ZHANG Huiyan; SHEN Zihao; LI Chuanchang

doi:10.12299/jsues.23-0238

Volume 38 Issue 2

Jun. 2024

Turn off MathJax

Article Contents

Article Navigation > Journal of Shanghai University of Engineering Science > 2024 > 38(2): 158-164

ZHANG Haibo, LIU Yanhui, ZHANG Huiyan, SHEN Zihao, LI Chuanchang. Research progress in additively manufactured of selective laser melting 316 stainless steel[J]. Journal of Shanghai University of Engineering Science, 2024, 38(2): 158-164. doi: 10.12299/jsues.23-0238

Citation:

ZHANG Haibo, LIU Yanhui, ZHANG Huiyan, SHEN Zihao, LI Chuanchang. Research progress in additively manufactured of selective laser melting 316 stainless steel[J]. Journal of Shanghai University of Engineering Science, 2024, 38(2): 158-164. doi: 10.12299/jsues.23-0238

Citation:

PDF( 2025 KB)

Research progress in additively manufactured of selective laser melting 316 stainless steel

doi: 10.12299/jsues.23-0238

a.
School of Mechanical and Automotive Engineering, Shanghai University of Engineering Science, Shanghai 201620, China
b.
School of Materials Science and Engineering, Shanghai University of Engineering Science, Shanghai 201620, China

Received Date: 2023-11-28
Publish Date: 2024-06-30

Abstract

Abstract

Selective laser melting (SLM) technology has broad application prospects in the fields of metal additive manufacturing, aerospace vehicles, etc. The research progress of SLM316 stainless steel materials in terms of process, structure, properties, and applications were summarized, and the existing problems and solutions were analyzed and explored. The problems in the production process, product quality, performance stability, and post-treatment process of SLM were analyzed. The microstructure and mechanical properties of 316 stainless steel additive were further studied. influences of the process on the microstructure and properties were analyzed. By reasonably controlling the laser additive manufacturing process, it can provide support for the application of the technology in the industry.
- vehicle engineering,
- laser melting,
- welding procedure,
- research review

FullText(HTML)

References(27)

References

[1]	RIEMER A, LEUDER S, THONE M, et al. On the fatigue crack growth behavior in 316L stainless steel manufactured by selective laser melting[J] . Engineering Fracture Mechanics, 2014, 120: 15 − 25.
[2]	CARROLL B E, PALMER T A, BEESE A M. Anisotropic tensile behavior of Ti-6Al-4V components fabricated with directed energy deposition additive manufacturing[J] . Acta Materialia, 2015, 87: 309 − 320.
[3]	THIJS L, VERHAEGHE F, CRAEGHS T, et al. A study of the microstructural evolution during selective laser melting of Ti–6Al–4V[J] . Acta Materialia,2010,58(9):3303 − 3312. doi: 10.1016/j.actamat.2010.02.004
[4]	ZAEH M F, BRANNER G. Investigations on residual stresses and deformations in selective laser melting[J] . Production Engineering,2010,4(1):35 − 45. doi: 10.1007/s11740-009-0192-y
[5]	YUSUF S M, CHEN Y F, BOARDMAN R, et al. Investigation on porosity and microhardness of 316L stainless steel fabricated by selective laser melting[J] . Metals,2023,39(7):64 − 72.
[6]	丁利, 李怀学, 王玉岱, 等. 热处理对激光选区熔化成形 316不锈钢组织与拉伸性能的影响[J] . 中国激光,2015(4):179 − 185.
[7]	SUN Z J, TAN X P, TOR S B, et al. Selective laser melting of stainless steel 316L with low porosity and high build rates[J] . Materials & Design, 2016, 104: 359−359 − 3359 − 369.
[8]	LIVERANI E, TOSCHI S, CESCHINI L, et al. Effect of selective laser melting (SLM) process parameters on microstructure and mechanical properties of 316L austenitic stainless steel[J] . Journal of Materials Processing Technology,2017,249:255 − 263.
[9]	CASATI R, LEMKE J, VEDANI M. Microstructure and fracture behavior of 316L austenitic stainless steel produced by selective laser melting[J] . Journal of Materials Science & Technology, 2016, 49(15): 739 − 740.
[10]	ZHENG Z, WANG L, YAN B. Effects of laser power on the microstructure and mechanical properties of 316L stainless steel prepared by selective laser melting[J] . International Journal of Modern Physics B,2017,31(16/19):174 − 186.
[11]	LODHIA M J K, DEENB K M, GREENLEE M C, et al. Additiely manufactured 316L stainless steel with improved corrosion resistance and biological response for biomedical applications[J] . Additive Manufacturing, 2019, 27: 8−8 − 19.
[12]	SAEIDI K, GAO X, ZHANG Y, et al. Hardened austenite steel with columnar sub-grain structures formed by laser melting[J] . Materials Science and Engineering: A, 2015, 625: 221 − 229.
[13]	WANG Z, GAO D. Friction and wear properties of stainless steel sliding against polyetheretherketone and carbon-fiber-reinforced polyether ether ketone under natural seawater lubrication[J] . Materials & design,2014,53(1):881 − 887.
[14]	BARTOLOMEUA F, BUCIUMEANU M, PINTO E, et al. 316L stainless steel mechanical and tribological behavior: A comparison between selective laser melting, hot pressing and conventional casting[J] . Additive Manufacturing,2017,25(12):81 − 89.
[15]	WANG P F, HAN Z. Friction and wear behaviors of a gradient nano-grained AISI 316L stainless steel under dry and oil-lubricated conditions[J] . Journal of Materials Science & Technology,2018,34(10):125 − 132.
[16]	ZHANG Z, CHU B, WANG L, et al. Comprehensive effects of placement orientation and scanning angle on mechanical properties and behavior of 316L stainless steel based on the selective laser melting process[J] . Journal of Alloys and Compounds, 2019, 791: 166 − 175.
[17]	SUN Y, MOROZ A, ALRBAEY K. Sliding wear characteristics and corrosion behaviour of selective laser melted 316L stainless steel[J] . Journal of Materials Engineering and Performance,2014,23(2):215 − 223.
[18]	CASATI R, LEMKE J, VEDANI M. Microstructure and fracture behavior of 316L austenitic stainless steel produced by selective laser melting[J] . Journal of Materials Science & Technology, 2016, 32(8): 738−738 − 7738 − 744.
[19]	ZHONG Y, LIU LF, WIKMAN S, et al. Intragranular cellular segregation network structure strengthening 316L stainless steel prepared by selective laser melting[J] . Journal of Nuclear Materials, 2016, 470: 170 − 178.
[20]	ZHAO H, HUMBEECK JV, SOHIER J, et al. Electrochemical polishing of 316L stainless steel slotted tube coronary stents[J] . Journal of Materials Science. Materials in Medicine, 2002, 13(10): 911 − 916.
[21]	EHSANI A, MAHJANI MG, MOSHREFI R, et al. Electrochemical and DFT study on the inhibition of 361L stainless steel corrosion in acidic medium by 1-(4-nitrophenyl)-5-amino-1H- tetrazole[J] . RSC Advances,2014,4(38):2003 − 2010.
[22]	LUO J P, JIA X, GU R N, et al. 316L stainless steel manufactured by selective laser melting and its biocompatibility with or without hydroxyapatite coating[J] . Metals, 2018, 8(7): 548 − 555. doi: 10.3390/met8070548
[23]	MEI X , WANG X , PENG Y, et al. Interfacial characterization and mechanical properties of 316L stainless steel/inconel 718 manufactured by selective laser melting[J] . Materials Science and Engineering,2019(758):185 − 191.
[24]	QIU C, KINDI M A , ALADAWI A S, et al. A comprehensive study on microstructure and tensile behaviour of a selectively laser melted stainless steel[J] . Scientific Reports, 2018, 8(1): 7785.
[25]	SALMANA O O, GAMMER C, CHAUBEY A K, et al. Effect of heat treatment on microstructure and mechanical properties of 316L steel synthesized by selective laser melting[J] . Materials Science & Engineering, 2019, 748: 205 − 212.
[26]	Prashanth K G, Eckert J. Formation of metastable cellular microstructures in selective laser melted alloys[J] . Journal of Alloys and Compounds, 2017, 707: 27 − 34.
[27]	KARGAR B S, MOAYED M H, BABAKHANI A, et al. Improving the corrosion behaviour of powder metallurgical 316L alloy by prepassivation in 20% nitric acid[J] . Corrosion Science, 2011, 53(1): 135 − 146. doi: 10.1016/j.corsci.2010.09.004