Output performance of composite tribo-materials based on NiFe2O4/BaTiO3

YAN Yimeng; LI Bin; QI Baoliang; CHEN Jun; JIAO Yuanjing

doi:10.12299/jsues.22-0329

Volume 37 Issue 4

Dec. 2023

Turn off MathJax

Article Contents

Article Navigation > Journal of Shanghai University of Engineering Science > 2023 > 37(4): 359-362

YAN Yimeng, LI Bin, QI Baoliang, CHEN Jun, JIAO Yuanjing. Output performance of composite tribo-materials based on NiFe2O4/BaTiO3[J]. Journal of Shanghai University of Engineering Science, 2023, 37(4): 359-362. doi: 10.12299/jsues.22-0329

Citation:

YAN Yimeng, LI Bin, QI Baoliang, CHEN Jun, JIAO Yuanjing. Output performance of composite tribo-materials based on NiFe₂O₄/BaTiO₃[J]. Journal of Shanghai University of Engineering Science, 2023, 37(4): 359-362. doi: 10.12299/jsues.22-0329

Citation:

PDF( 1089 KB)

Output performance of composite tribo-materials based on NiFe₂O₄/BaTiO₃

doi: 10.12299/jsues.22-0329

1.
School of Materials Science and Engineering, Shanghai University of Engineering Science, Shanghai 201620, China
2.
Shanghai Fangyou Intelligent Technology Co., Ltd., Shanghai 200801, China

Received Date: 2022-11-07
Publish Date: 2023-12-30

Abstract

Abstract

Tribo-material is one of the most critical components in triboelectric nanogenerators (TENG). NiFe₂O₄/BaTiO₃ nanoparticles were filled into polydimethylsiloxane (PDMS), and the effects of two inorganic materials as fillers on generator output performance were studied in order to obtain a flexible triboelectric nanogenerator with higher output performance. It was found that both NiFe₂O₄ and BaTiO₃ ceramic particles were polycrystalline and well-crystallized. Both nanoparticles could effectively enhance the electrical output value of PDMS. In particular, the output voltage of NiFe₂O₄/BaTiO₃/PDMS composite film was significantly higher than that of PDMS film. The NiFe₂O₄/BaTiO₃/PDMS composite film with a weight ratio of 7.5∶2.5∶90 possessed the highest output voltage.
- triboelectric nanogenerators (TENG),
- magnetic materials,
- ferroelectrics,
- composite materials

FullText(HTML)

References(15)

References

[1]	SHI X L, CHEN W Y, ZHANG T, et al. Fiber-based thermoelectrics for solid, portable, and wearable electronics[J] . Energy & Environmental Science,2021,14(2):729 − 764.
[2]	IM J S, PARK I K. Mechanically robust magnetic Fe₃O₄ nanoparticle/polyvinylidene fluoride composite nanofiber and its application in a triboelectric nanogenerator[J] . ACS Applied Materials & Interfaces,2018,10(30):25660 − 25665.
[3]	GUO Y B, LI K R, HOU C Y, et al. Fluoroalkylsilane-modified textile-based personal energy management device for multifunctional wearable applications[J] . ACS Applied Materials & Interfaces,2016,8(7):4676 − 4683.
[4]	CAO Y L, GUO Y B, CHEN Z X, et al. Highly sensitive self-powered pressure and strain sensor based on crumpled MXene film for wireless human motion detection[J] . Nano Energy,2022,92:106689. doi: 10.1016/j.nanoen.2021.106689
[5]	METI S, SAGAR H P, RAHMAN M R, et al. Assessment of triboelectricity in colossal-surface-area-lanthanum oxide nanocrystals synthesized via low-temperature hydrothermal process[J] . Journal of Materials Science: Materials in Electronics,2021,32(15):20351 − 20361. doi: 10.1007/s10854-021-06545-7
[6]	GUO Y B, CHEN Z X, YANG W F, et al. Multifunctional mechanical sensing electronic device based on triboelectric anisotropic crumpled nanofibrous mats[J] . ACS Applied Materials & Interfaces,2021,13(46):55481 − 55488.
[7]	ZHANG S N, XU J M, YU J B, et al. An all-rubber-based woven nanogenerator with improved triboelectric effect for highly efficient energy harvesting[J] . Materials Letters,2021,287:129271. doi: 10.1016/j.matlet.2020.129271
[8]	CHEN Z X, CAO Y L, YANG W F, et al. Embedding in-plane aligned MOF nanoflakes in silk fibroin for highly enhanced output performance of triboelectric nanogenerators[J] . Journal of Materials Chemistry A,2022,10(2):799 − 807. doi: 10.1039/D1TA08605G
[9]	LIU J D, YU D, ZHENG Z P, et al. Lead-free BiFeO₃ film on glass fiber fabric: Wearable hybrid piezoelectric-triboelectric nanogenerator[J] . Ceramics International,2021,47(3):3573 − 3579. doi: 10.1016/j.ceramint.2020.09.205
[10]	MANCHI P, GRAHAM S A, DUDEM B, et al. Improved performance of nanogenerator via synergetic piezo/triboelectric effects of lithium niobate microparticles embedded composite films[J] . Composites Science and Technology,2021,201:108540. doi: 10.1016/j.compscitech.2020.108540
[11]	GUO Y B, CHEN Z X, WANG H Z, et al. Progress of inorganic filler based composite films for triboelectric nanogenerators[J] . Journal of Inorganic Materials,2021,36(9):919 − 928. doi: 10.15541/jim20200742
[12]	ZHANG J H, HAO X H. Enhancing output performances and output retention rates of triboelectric nanogenerators via a design of composite inner-layers with coupling effect and self-assembled outer-layers with superhydrophobicity[J] . Nano Energy,2020,76:105074. doi: 10.1016/j.nanoen.2020.105074
[13]	GUO Y B, CAO Y L, CHEN Z X, et al. Fluorinated metal-organic framework as bifunctional filler toward highly improving output performance of triboelectric nanogenerators[J] . Nano Energy,2020,70:104517. doi: 10.1016/j.nanoen.2020.104517
[14]	DUDEM B, BHARAT L K, PATNAM H, et al. Enhancing the output performance of hybrid nanogenerators based on Al-doped BaTiO₃ composite films: a self-powered utility system for portable electronics[J] . Journal of Materials Chemistry A,2018,6(33):16101 − 16110. doi: 10.1039/C8TA04612C
[15]	SEUNG W, YOON H J, KIM T Y, et al. Boosting power-generating performance of triboelectric nanogenerators via artificial control of ferroelectric polarization and dielectric properties[J] . Advanced Energy Materials,2017,7(2):1600988. doi: 10.1002/aenm.201600988