Finite element simulation on 0# Block with V-shaped support

TANG Yang; WANG Guowei; LIU Xin; WANG Dawei; QI Xingjun

doi:10.12299/jsues.21-0245

Volume 37 Issue 1

Mar. 2023

Turn off MathJax

Article Contents

Article Navigation > Journal of Shanghai University of Engineering Science > 2023 > 37(1): 76-82

TANG Yang, WANG Guowei, LIU Xin, WANG Dawei, QI Xingjun. Finite element simulation on 0# Block with V-shaped support[J]. Journal of Shanghai University of Engineering Science, 2023, 37(1): 76-82. doi: 10.12299/jsues.21-0245

Citation:

TANG Yang, WANG Guowei, LIU Xin, WANG Dawei, QI Xingjun. Finite element simulation on 0# Block with V-shaped support[J]. Journal of Shanghai University of Engineering Science, 2023, 37(1): 76-82. doi: 10.12299/jsues.21-0245

Citation:

PDF( 1497 KB)

Finite element simulation on 0# Block with V-shaped support

doi: 10.12299/jsues.21-0245

TANG Yang^1
,,
WANG Guowei^{2
,
,},
LIU Xin³,
WANG Dawei⁴,
QI Xingjun⁵

1.
Countryside Highway Administration Bureau of Wufeng Tujia Autonomous County, Yichang 443413, China
2.
Jinan Jinqu Road Survey Design Research Co., Ltd., Jinan 250101, China
3.
Central-Southern Safety & Environment Technology Institute Co., Ltd., Wuhan 430051, China
4.
Wenzhou Traffic Planning and Design Institute, Wenzhou 325000, China
5.
School of Transportation Engineering, Shandong Jianzhu University, Jinan 250101, China

Received Date: 2021-11-08
Accepted Date: 2022-01-04
Publish Date: 2023-03-31

Abstract

Abstract

With the V-shaped support continuous rigid frame bridge as the engineering background, the 0# block with V-shaped support was used for the construction stage analysis and construction working condition analysis. According to the analysis results, the following conclusions can be drawn: The stress of the 0# block with V-shaped support met the specification requirements during the construction process, and the stress characteristics during the construction process can be used for reference by designers and constructors. The 0# block with V-shaped support was more sensitive to horizontal displacement along the bridge and vertical displacement, and structural displacement monitoring should be paid attention to during the construction process. There is a certain gap between the analysis results of the construction working condition analysis and the more real analysis results of the construction stage, and the construction stage analysis is used as much as possible in the calculation and analysis of the actual project.
- V-shaped support,
- 0# block,
- construction stage analysis,
- construction working condition analysis,
- finite element analysis

FullText(HTML)

References(10)

References

[1]	唐杨. 国内V形支撑结构桥梁的设计与研究综述[J] . 特种结构,2019,36(3):101 − 115. doi: 10.3969/j.issn.1001-3598.2019.03.019
[2]	陈品明, 卞绍洋, 叶斌. 基于连续刚构桥 V形墩的极限承载能力应用[J] . 公路工程,2017,42(2):182 − 186. doi: 10.3969/j.issn.1674-0610.2017.02.035
[3]	张亚东, 张依睿. V形墩连续刚构桥结构设计与分析[J] . 南京工程学院学报,2017,15(2):29 − 33.
[4]	郁钧辉, 王春, 叶贵如. V形墩刚构桥顶推过程局部应力分析[J] . 华东公路,2013(3):3 − 6.
[5]	刘孝武, 袁明军, 张海旭, 等. 大跨度V型墩节点施工过程的三维仿真分析[J] . 工程与建设,2014,28(4):433 − 435. doi: 10.3969/j.issn.1673-5781.2014.04.001
[6]	韩保勤, 张孝铭. V形墩连续刚构桥施工控制研究[J] . 公路交通科技(应用技术版),2016(11):201 − 203.
[7]	曾勇, 张路, 唐杨, 等. 大跨预应力混凝土连续梁桥带腹拱的V形0#节段空间应力分析[J] . 结构工程师,2019,35(6):43 − 48. doi: 10.3969/j.issn.1005-0159.2019.06.006
[8]	唐杨, 任荣, 王大为, 等. 填充混凝土对V形钢墩刚构-连续梁桥船撞桥墩的影响研究[J] . 陕西理工大学学报(自然科学版),2020,36(5):57 − 63.
[9]	李立峰, 邵旭东, 赵华, 等. 长沙湘江南大桥V形腿设计与分析[J] . 公路,2002(11):32 − 36. doi: 10.3969/j.issn.0451-0712.2002.11.008
[10]	李旺丰. V形支撑结构施工阶段的空间应力分析[J] . 北方交通,2008(6):96 − 99. doi: 10.3969/j.issn.1673-6052.2008.06.036